JACTON JTC Cubic Screw Jack

JACTON JTC Cubic Screw Jack featuring a compact and versatile cubic housing. High reliability and performance are guaranteed with precision worm gear set and lead screw. Capacities range from 2.5 kN to 500 kN. The cubic body design offers modern aesthetics and versatile mounting on two faces of the gearbox eliminating the need for upright and inverted variants. This series is lowest cost and good stock.

Key Features:

• 12 sizes, lifting capacities from 2.5 kN to 500 kN as standard
• Translating and Rotating Screw configurations
• Anti-rotation design option
• Two Gear ratios and single screw leads are standard.
• Customised high lead screws available
• Screw end configurations include top plate, plain, threaded, and clevis ends.
• Can be connected together in systems to enable multiple units to be synchronised to operated and controlled together, see below System Arrangement catalogue here for typical arrangements.
• Many accessories are available, see Accessories catalogue here
• Motor mounts available on request, see examples here

Manufactured by: JACTON
Sold and Serviced by Motion Technologies Pty Limited

JACTON JTW Machine Screw Jack

JACTON JTW Machine Screw Jacks of conventional design are used for controlled lifting, lowering, tilting and slewing movements are required in a safe and reliable operation. Machine screw jacks offer precise positioning, uniform lifting speeds and capacity up to 100 tons. Standard model configurations include upright or inverted units with translating or rotating lifting screws. End configurations include top plate, plain, threaded, and clevis ends. This series has low cost with short delivery time.

Key Features:

• 10 sizes with load capacities from 1 ton to 100 ton as standard
• Anti-rotation design option
• Two worm gear ratios
• Single start screw leads standard. Customised high lead screws are available.
• Screw end configurations include top plate, plain, threaded, and clevis ends.
• Can be connected together in systems to enable multiple units to be synchronised to operated and controlled together, see below System Arrangement catalogue here for typical arrangements.
• Many accessories are available, see Accessories catalogue here
• Motor mounts available on request, see examples here

Manufactured by: JACTON
Sold and Serviced by Motion Technologies Pty Limited

JACTON JTH Cubic Screw Jack
(with through mounting holes)

JACTON JTH Cubic Screw Jack housing with through mounting holes in the jack body that provide additional mounting versatility when compared to JTC series above. They dimensionally match those of competitor brands.

The cubic design offers modern aesthetics and versatile mounting on two faces of the gearbox, while eliminating the need for upright and inverted variants.

Key Features:

• 6 sizes with load capacities from 10 kN to 200 kN
• 3 standard gear ratios
• Translating and Rotating Screw configurations
• Anti-rotation design option
• Standard trapezoidal screws from Ø22 to Ø70 mm.
• Customised multi-lead Tr screws and ball screws.
• Screw end configurations include top plate, plain, threaded, and clevis ends.
• Can be connected together in systems to enable multiple units to be synchronised to operated and controlled together, see below System Arrangement catalogue here for typical arrangements.
• Many accessories are available, see Accessories catalogue here
• Motor mounts available on request, see examples here

Manufactured by: JACTON
Sold and Serviced by Motion Technologies Pty Limited

JACTON JTB Ball Screw Jack

JACTON JTB Ball Screw Jack are the ball screw version of the JTW jack as above where a ball screw is used instead of a trapezoidal lead screw. They are used for same applications as JTW series but where high travel rate, less power and long life is required.

Key Features:

• 7 sizes with load capacities from 1 ton to 35 ton as standard
• Translating and Rotating Screw configurations
• Anti-rotation design option
• Two or three worm gear ratios (model dependant)
• Single start screw leads standard. Customised high lead screws are available.
• Screw end configurations include top plate, plain, threaded, and clevis ends.
• Can be connected together in systems to enable multiple units to be synchronised to operated and controlled together, see below System Arrangement catalogue here for typical arrangements.
• Many accessories are available, see Accessories catalogue here
• Motor mounts available on request, see examples here

Manufactured by: JACTON
Sold and Serviced by Motion Technologies Pty Limited

JACTON JWB Ball Screw Jack

JACTON JWB Ball Screw Jack is suitable for high speed, high frequency and excellent performance.

Features:

• High efficiency
  Rolling friction improve efficiency greatly, only a little drive power can generate great thrust force.
• High Speed
  Rolling friction speed up travel of screw easily
• Lifetime longer
  High precision ball screw can make JWB’s lifetime longer by 3 times comparing with JWB

Manufactured by: JACTON
Sold and Serviced by Motion Technologies Pty Limited

JACTON JTD Cubic Ball Screw Jack

JACTON JTD Cubic Ball Screw Jack are the ball screw version of the JTC jack as above where a ball screw is used instead of a trapezoidal lead screw. They are used for same applications as JTC series but where high travel rate, less power and long life is required.

Key Features:

• 7 sizes with load capacities from 1 ton to 35 ton as standard
• Translating and Rotating Screw configurations
• Anti-rotation design option
• Two or three worm gear ratios (model dependant)
• Single start screw leads standard. Customised high lead screws are available.
• Screw end configurations include top plate, plain, threaded, and clevis ends.
• Can be connected together in systems to enable multiple units to be synchronised to operated and controlled together, see below System Arrangement catalogue here for typical arrangements.
• Many accessories are available, see Accessories catalogue here
• Motor mounts available on request, see examples here

Manufactured by: JACTON
Sold and Serviced by Motion Technologies Pty Limited

JACTON JSS Stainless Steel Worm Screw Jack

JACTON JSS Stainless Steel Worm Screw Jack series if made of full stainless steel construction are used in harsh or corrosive environments. They are also often used in applications that require frequent wash down such as Marine, Water Treatment, Food Processing, Pulp& Paper Machines.

Key Features:

• 5 sizes with load capacities from 1 ton to 20 ton as standard
• Translating and Rotating Screw configurations
• Anti-rotation design option
• Two worm gear ratios
• Single start screw leads standard. Customised high lead screws are available.
• Screw end configurations include top plate, plain, threaded, and clevis ends.
• Can be connected together in systems to enable multiple units to be synchronised to operated and controlled together, see below System Arrangement catalogue here for typical arrangements.
• Many accessories are available, see Accessories catalogue here
• Motor mounts available on request, see examples here

Manufactured by: JACTON
Sold and Serviced by Motion Technologies Pty Limited

JACTON JTM Worm Screw Jack

JACTON JTM Worm Screw Jack series is designed for heavy loads up to 1000 kN intended to replace European jacks where they have different mounting dimensions.

They utilise all the features and benefits of JTW series except incorporate tapered roller bearings in place of ball thrust bearings to provide additional lateral support to the lift screw.

Tapered roller bearings are also used on the worm shafts to provide extra shaft support where high external loads exist.

Key Features:

• 6 sizes with load capacities from 10 kN to 1000 kN
• Choice of 2 worm gear ratios
• Anti-rotation design option
• Single start screw leads standard. Customised high lead screws are available.
• Screw end configurations include top plate, plain, threaded, and clevis ends.
• Can be connected together in systems to enable multiple units to be synchronised to operated and controlled together, see below System Arrangement catalogue here for typical arrangements.
• Many accessories are available, see Accessories catalogue here
• Motor mounts available on request, see examples here

Manufactured by: JACTON
Sold and Serviced by Motion Technologies Pty Limited

JACTON JTS Bevel Gear Screw Jack

JACTON JTS Bevel Gear Screw Jack series uses spiral bevel gearing for higher travel rates, higher efficiency, higher duty cycle and longer life than worm gear screw jacks. They have the added advantage of being able to use the bevel design to eliminate the need for separate bevel gearboxes in multi axis systems.

Key Features:

• 4 sizes with load capacities from 25 kN to 200 kN
• 2 standard gear ratios
• Translating and Rotating Screw configurations
• Single screw leads standard and multi-lead screw optional

Manufactured by: JACTON
Sold and Serviced by Motion Technologies Pty Limited

JACTON JTG Bevel Gear Screw Jack

JACTON JTG Bevel Gear Screw Jack series is the same as JTH series except that the gear centre height matches the JT series bevel gearboxes for added multi-axis system flexibility. They have the same advantage of being able to use the bevel design to reduce the need for separate bevel gearboxes.

They also have spiral bevel gearing for higher travel rates, higher efficiency, higher duty cycle and longer life than worm gear screw jacks.

Key Features:

• 4 sizes with ball or trapezoidal lift screws for load capacities from 30 kN to 150 kN
• Choice of trapezoidal or ball screws with sizes from Ø32 to Ø63
• Translating and Rotating Screw configurations
• Single screw leads standard and multi-lead screw optional.

Manufactured by: JACTON
Sold and Serviced by Motion Technologies Pty Limited

JACTON JSL Aluminium Bevel Ball Screw Jacks

JACTON JSL Aluminium Bevel Ball Screw Jacks are a spiral bevel gear jack with ball screw spindle with jack housing of high strength aluminium alloy with anti-oxidation treatment (except model JSL40).

Compared to cast iron gearbox they are light weight and dissipate heat quickly.

They feature 1, 2, 3 or 4 alloy steel input shafts with a choice of 2 gear ratios with multiple ball screw lead choices to provide a wide range of performance capability for high frequency operation up to 14 m/min.

These jacks are especially suited for high speed and high frequency operation due to utilising spiral bevel gears and high quality ball screw spindles.

They also have high overall efficiency and may require a load holding brake depending on the application.

Key Features:

• Four frame sizes for thrust up to 40 kN
• Choice of 3 or 4 ball screw leads in each size
• 1:1 or 2:1 bevel gear ratio
• Suitable for high duty cycle up to 60%
• Can be connected together in systems to enable multiple units to be synchronised to operated and controlled together, see below System Arrangement catalogue here for typical arrangements.
• Many accessories are available, see Accessories catalogue here
• Motor mounts available on request, see examples here

Manufactured by: JACTON
Sold and Serviced by Motion Technologies Pty

JACTON JTE Screw Jack Electric Cylinders

JACTON JTE Screw Jack Electric Cylinders series are a conventional screw jack built with an integral cylinder and thrust tube to fully enclose the screw with a guided piston cylinder.

They provide an alternate choice to hydraulic and pneumatic cylinders that are clean and reliable without oil or air leaks to provide a solution that is speed & position controlled and self-locking.

Key Features:

• Ball or machine screw versions
• 4 sizes from 2.5 to 20 tons
• 2 gear ratios
• Rear clevis and trunnions mounts available.
• Can be connected together in systems to enable multiple units to be synchronised to operated and controlled together, see below System Arrangement catalogue here for typical arrangements.
• Many accessories are available, see Accessories catalogue here
• Motor mounts available on request, see examples here

Manufactured by: JACTON
Sold and Serviced by Motion Technologies Pty Limited

JACTON LAP/LA Electric Linear Cylinders

JACTON LAP Electric Linear Cylinder series incorporate a parallel motor design

JACTON LA Electric Linear Cylinder series are an in-line motor/cylinder design

These cylinders incorporate switch devices to indicate that the cylinder has stopped due to overload or jamming mid stroke, either while extending or retracting. They are separate switches to end of travel limit switches which are optional.

A further significant feature is that they use IEC motor mounts which enables the use of any AC motor. This allows the use of Australian Standard motors including explosionproof and mine motors as well as servo motors which can be readily adapted if required.

• Motor power up to 18.5 kW
• Speed up to 84 mm/sec
• Thrust up to 25 kN

Manufactured by: JACTON
Sold and Serviced by Motion Technologies Pty Limited

JACTON Electric Worm Screw Jack

JACTON Electric Worm Screw Jack

Manufactured by: JACTON
Sold and Serviced by Motion Technologies Pty Limited

JACTON Screw Jack Accessories

JACTON Screw Jack Standard Accessories include:

• Motor mounts (AC, DC, servo, stepper, etc)
• Handwheels
• Couplings
• Universal joints
• Cardan shafts for interconnecting jacks
• Proximity limit switches
• Trunnion mount adaptors
• Bellows boots
• Rod ends
• Position indicators (mechanical counters)

Rotary Limit Switches are also available here

Manufactured by: JACTON
Sold and Serviced by Motion Technologies Pty Limited

JACTON JT Spiral Bevel Gearbox

JACTON JT Spiral Bevel Gearbox with ground high precision case hardened gearing for high power, speed and efficiency with low backlash.

Key Features:

• Suitable for general applications and screw jack systems
• Shaft height centre distance that matches JTG series of bevel screw jack
• 2, 3 and 4 way configurations
• Gear ratios of 1:1, 1.5:1, 2:1, 2.5:1, 3:1, 4:1 and 5:1
• Power range from 1.79 kW to 335 kW
• Torque ratings to 5,713 Nm
• Motor mounts

Manufactured by: JACTON
Sold and Serviced by Motion Technologies Pty Limited

JACTON JTP Cubic Spiral Bevel Gearbox

JACTON JTP Cubic Spiral Bevel Gearbox with ground high precision case hardened gearing for high power, speed and efficiency with low backlash for machines with heavy shock loads.

This series is intended for heavy duty general purpose applications as well as for connecting worm gear screw jacks into multi-point actuation systems.

Key Features:

• Suitable for general applications and screw jack systems
• 2, 3 and 4 way configurations
• Gear ratios of 1:1, 1.5:1, 2:1, 2.5:1, 3:1, 4:1 and 5:1
• Power range from 1.8 kW to 156 kW
• Torque ratings to 5,713 Nm
• Versions with solid shaft, hollow shaft and motor mounts
• Choice of cast iron, aluminium and stainless steel housings.

Manufactured by: JACTON
Sold and Serviced by Motion Technologies Pty Limited

JACTON JTA Aluminium Bevel Gearbox

JACTON JTA Aluminium Bevel Gearbox are general purpose spiral bevel gearboxes that are small in size.

Key Features:

• 4 frame sizes up to 4.9 kW rated
• Torque range from 2 Nm to 40 Nm
• Choice of 1:1 or 2:1 gear ratio
• 2 and 3 shaft versions
• Shaft diameters from Ø10 to Ø24

Manufactured by: JACTON
Sold and Serviced by Motion Technologies Pty Limited

JACTON Screw Jack System Arrangements

JACTON Screw Jack System Arrangements

Manufactured by: JACTON
Sold and Serviced by Motion Technologies Pty Limited

JACTON Screw Hoist for Sluice Gates

JACTON Screw Hoist for Sluice Gates are usually used for manual operation in water and sewage treatment plants as well as all kinds of drainage engineering, irrigation and hydro power projects. They are used to control steel gates, vertical slide gates, jet flow gates and fixed cone valves.

Key Features:

• 4 sizes with ½ to 3 ton capacity
• Screw diameter from Ø28 to Ø50 mm
• Dual drive spindles available as an option

Manufactured by: JACTON
Sold and Serviced by Motion Technologies Pty Limited

JACTON Screw Hand Crank Table Lift Mechanism

JACTON Screw Hand Crank Table Lift Mechanism

Manufactured by: JACTON
Sold and Serviced by Motion Technologies Pty Limited