Kollmorgen
Quick links to catalogues
- CT Series Step Motor
- Cartridge DDR (Direct Drive Rotary)
- Housed DDR Motor Selection Guide
- TBM Frameless Selection Guide
- TBM 2G Frameless Motors
- KBM Frameless Motor Selection Guide
- DS4 & DS6 Series Positioning Table
- URS Series Compact Ballscrew Positioning Tables
- ServoStar S200
- Goldline Direct Drive Linear
- Direct Drive DC Torque Motors
- Linear Positioners
Kollmorgen AKM Motor
The advanced Kollmorgen AKM high performance motor series offers a wide range of mounting, connectivity, feedback and other options. These motors offer superb flexibility to meet application needs. This series covers 7 frames sizes, 25 frame/stack combinations, 77 ‘standard’ windings, 0.16 to 53Nm, up to 8000rpm.
Manufactured by: Kollmorgen
Sold and Serviced by Motion Technologies Pty Limited
Kollmorgen AKM2G Servo Motor
Kollmorgen AKM2G Servo Motors offer extremely high torque density and high acceleration.
The AKM2G high performance motor series offers a wide range of mounting, connectivity, feedback and other options. These motors offer superb flexibility to meet application needs with:
- 6 frame sizes (58 to 192mm)
- 23 frame-stack length combinations
- More than 70 standard windings
Manufactured by: Kollmorgen
Sold and Serviced by Motion Technologies Pty Limited
Kollmorgen AKMH Stainless Steel Washdown Motor Selection Guide
Kollmorgen AKMH Stainless Steel Washdown series enhancement to Kollmorgen’s AKM motors.
Features are IP69K, FDA approved, full 316 stainless steel construction, brake option, continuous torque to 22Nm, peak torque to 92Nm.
Manufactured by: Kollmorgen
Sold and Serviced by Motion Technologies Pty Limited
Kollmorgen Washdown
Kollmorgen’s Washdown motors are available in frame sizes 2 through 6. These innovative motors incorporate industry-leading AKM electromagnetics within a housing protected by a 2-K coating and IP67-rated seal configuration. Stainless steel hardware is used on all precision interfaces.
Manufactured by: Kollmorgen
Sold and Serviced by Motion Technologies Pty Limited
Kollmorgen AKM2G Low Voltage Servo Motor
Kollmorgen AKM2G Low Voltage Servo Motors provide the same dynamic performance as Kollmorgen’s standard motors, but with winding optimised for 24-96 Vdc bus input. These motors are ideal for battery-operated applications such as mobile robots, portable medical equipment, AGV’s and more.
These drives can also be used to operated low voltage brushless Dc motors with all the advanced features provided by this drive family.
The following application note provides connection details.
Manufactured by: Kollmorgen
Sold and Serviced by Motion Technologies Pty Limited
Kollmorgen AKD Servo Drive
The Kollmorgen AKD Servo Drive delivers cutting edge technology and performance with one of the most compact footprints in the industry. These feature rich drives provide a solution for nearly any application, from basic torque and velocity applications, to indexing, to multiaxis programmable motion with embedded Kollmorgen Automation Suite. The versatile AKD sets the standard for power density and performance.
Manufactured by: Kollmorgen
Sold and Serviced by Motion Technologies Pty Limited
Kollmorgen AKD2G Servo Drive
The new Kollmorgen AKD2G Servo Drive introduces the Kollmorgen Servo on a Chip™ being a powerful computer engine that can control two axes simultaneously and up to 28 I/O. While we were at it, we streamlined the design by optimizing the AKD2G for single-cable AKMD2G motors with powers up to 8 kW total.
These drives include EtherCat control with Safety over EtherCat, STO, SIL3 safety and Safe I/O.
Available in both single and dual axis versions for connection to 240 Vac single phase or 415 Vac three phase mains.
These drives can also be used to operate low voltage brushless DC motors with all the advanced features provided by this family.
The following application note provides connection details.
Manufactured by: Kollmorgen
Sold and Serviced by Motion Technologies Pty Limited
Kollmorgen S700 Digital Servoamplifier
Kollmorgen S700 Digital Servoamplifier adds onboard Ethernet and safety functions to the performance and features of Kollmorgen’s popular ServoStar 300. Output current up to 24A. Optimised resolver interface. MMC memory card for backup for parameters and firmware. Safety expansion card with safe-reduced speed and safe operational stop. Onboard Ethernet-based bus communication.
Manufactured by: Kollmorgen
Sold and Serviced by Motion Technologies Pty Limited
Kollmorgen Electric Cylinder
Kollmorgen Electric Cylinders offer a cost effective solution for linear positioning of supported or pivoting loads. They are descendents of hydraulic or pneumatic cylinders with many of the same design features but offer the benefit of providing a simpler and cleaner transmission.
When high thrust is required these rod type cylinders have the advantage over other linear components because the thrust is transmitted in-line. They also have the advantage of being isolated from the work area so can retract during other operations.
Flexibility in mounting allows either rigid or pivoting options depending on the requirement of the application. In addition to mounting options a wide variety of servo and stepper motor and drive products are offered as an integrated solution to provide the most cost effective combination of thrust, speed and positioning accuracy for your application.
Manufactured by: Kollmorgen
Sold and Serviced by Motion Technologies Pty Limited
Kollmorgen Permanent Magnet DC Motor
Kollmorgen Permanent Mangnet DC Motor, standard PMDC Motor features:
- Patented anti-cogging magnets for smooth low speed operation. High overcurrent capacity and dynamic braking without demagnetization
- Polyster impregnated armature for electrical and mechanical integrity
- Class H insulation
- Large sealed bearings are standard
- NEMA or metric mounting
- Conduit box (gasketed) – large wiring compartment for easy termination
- TEFC (fan-cooled) and TENV (non-vented) configurations
- Rugged, fused commutator
- Long life, constant force brush springs with field replaceable brushes
- Environmentally protected models – explosion proof and washdown duty
- Permanent magnet fields are more efficient, smaller, lighter and offer wider speed range than comparable wound field motors
Manufactured by: Kollmorgen
Sold and Serviced by Motion Technologies Pty Limited
Enhanced Kollmorgen Motor (EKM) Series Motors for Aerospace and Defense
Enhanced Kollmorgen Motor (EKM) is ruggedized military grade brushless servo motor based on Kollmorgen traditional AKM series.
- IP67 sealed
- 6 frames sizes
- Up to 53Nm continuous
- Rated power from 110 watts to 7.42kW
- Speeds to 8000rpm
- MIL-C-38999 connectors
- Temperature rated -15 degrees to 54 degrees
- Stainless steel shaft with viton shaft seal
- Shock and vibration tested per MIL-STD-810E
Manufactured by: Kollmorgen
Sold and Serviced by Motion Technologies Pty Limited
Kollmorgen CT Series Step Motor
Kollmorgen CT Series Step Motors incorporate innovative cooling technology (patent pending), high torque magnetic designs, rugged bearings, and high voltage insulation systems. These features provide high torque motors, which support large mechanical loads, and can be used with all drives. In addition, CTM Maximum Series Step Motors use patented enhancing technology to increase efficiency and provide even more torque at all speeds.
Outstanding performance is only part of the CT story. CT Series motors are available in the most popular sizes (17, 23 and 34) and are available in a variety of lengths, windings and shafts.
Manufactured by: Kollmorgen
Sold and Serviced by Motion Technologies Pty Limited
Kollmorgen Cartridge DDR (Direct Drive Rotary)
Kollmorgen Cartridge DDR motor is the newest addition to the Kollmorgen line of DDR products. The Cartridge DDR motor does not have bearings and it mounts to a machine using the machine’s existing bearings to support the motor’s rotor. The frame of the Cartridge DDR motor mounts to a pilot and bolt circle on the machine frame much like a conventional motor. The rotor engages to the load using an innovative compression coupling, which effectively makes the motor’s rotor and the load one piece, eliminating any compliance between the motor and the load.
- Torque to 1090Nm
- Speed to 2500rpm
Manufactured by: Kollmorgen
Sold and Serviced by Motion Technologies Pty Limited
Kollmorgen Housed DDR Motor Selection Guide
Kollmorgen Housed Direct Drive Rotary (DDR) motor series offer a high performance, zero maintenance servo solution. They achieve very high torque density through the combination of large diameter, short length, and a high number of magnetic poles.
By pairing the Housed DDR motor series with our wide range of plug-and play Ethernet-based AKD™ servo drives, you can optimize performance and increase the machine’s overall effectiveness. The DDR motor can be used as a flexible indexer, providing programmable, rapid, indexing far exceeding the throughput of conventional mechanical or variable reluctance technology indexers. It can also be used for replacing mechanical transmissions such as gearboxes, timing belts, and rack and pinion reducers.
- Torque range from 5.3Nm to 339Nm continuous
- Speeds from 500 to 120rpm
Manufactured by: Kollmorgen
Sold and Serviced by Motion Technologies Pty Limited
Kollmorgen TBM Frameless Selection Guide
Kollmorgen TBM frameless motor is a new series of direct drive torque motors designed for applications that require high power in a small, compact form factor with minimized weight and inertia. Typical applications include robotic joints, weapon stations, sensor gimbals, sight systems, UAV propulsion and guidance, as well as many others.
TBM(S) Product Features:
- 3 frame sizes ranging from 60mm (2.36 inches) up to 129mm (5.08 inches)
- 3 stacks lengths per frame
- 2 standard winding options per frame
- Latching Hall Effects (pre-aligned / factory installed)
- Low Cogging designs
- Stainless Steel Yokes for maximum corrosion protection
- RoHS Compliant
- Banded Rotors
- Laser Marked Armatures
Manufactured by: Kollmorgen
Sold and Serviced by Motion Technologies Pty Limited
Kollmorgen TBM 2G Frameless Motors
Kollmorgen TBM 2G Frameless Motors deliver next-generation torque in a more compact electromagnetics package. Designed for direct embedding in your machine, these 48 VDC motors help you engineer each axis to be smaller, lighter, stronger, faster, smoother.
Manufactured by: Kollmorgen
Sold and Serviced by Motion Technologies Pty Limited
Kollmorgen KBM Frameless Motor Selection Guide
Kollmorgen KBM Frameless Motor has the following key features:
- 14 frame sizes
- 0.5Nm to 3445Nm continuous
- From 60mm to 780mm diameter
- Rated speeds to 18,000rpm
Manufactured by: Kollmorgen
Sold and Serviced by Motion Technologies Pty Limited
Kollmorgen DS4 & DS6 Series Positioning Table
Kollmorgen DS4 & DS6 Series Positioning Table are the most versatile and modular line of positioning tables. The following features make this series of positioning tables a choice for the most demanding applications. Travel lengths from 50mm-600mm cover a wide range of applications. Precision ballscrew drive, with 5mm and 10mm leads, offer high speed and efficiency, excellent repeatability and accuracy, and mechanical advantage. The ballscrews can be driven at up to 80rps, translating into speeds (with the 10mm lead) of up to 800mm/s, up to 2m stroke.
Manufactured by: Kollmorgen
Sold and Serviced by Motion Technologies Pty Limited
Kollmorgen URS Series Compact Ballscrew Positioning Tables
Kollmorgen URS Series Compact Ballscrew Positioning Tables with integrated steel rail provides superior product performance in a compact package.
Manufactured by: Kollmorgen
Sold and Serviced by Motion Technologies Pty Limited
Kollmorgen ServoStar S200
Kollmorgen ServoStar S200, 1.5, 3 and 6 amps cont. 20 to 90vDC or 120/240vAC supply. Kollmorgen S200 servo drives come standard with torque or velocity control and with add-on options can support Indexing, CANopen or DeviceNet. They are available for AC (120/240 VAC) or DC (20-90V) operation with current ratings from 1 A rms continuous to 18 A rms peak. They have a compact footprint ranging from 1.1″ (28.7mm) wide and 6.0″ (152.4mm) tall to 2.2″ (54.8mm) wide and 6.9″ (175mm) tall with depths ranging from 3.9″ (100.8mm) to 5.2″ (131.6mm) allowing them to fit into tight spaces. They are UL 508C recognised, CE marked, and conform to EN50178 and EN61800-3 standards
Manufactured by: Kollmorgen
Sold and Serviced by Motion Technologies Pty Limited
Kollmorgen Goldline Direct Drive Linear
Kollmorgen Goldline Direct Drive Linear has the following key features:
- 9 frame sizes
- Up to 305Nm
- Up to 500rpm
- Resolver and sine encoder versions
Manufactured by: Kollmorgen
Sold and Serviced by Motion Technologies Pty Limited
Kollmorgen Direct Drive DC Torque Motors
Kollmorgen Direct Drive DC Torque Motors have the following key features:
- Frameless
- Torques to greater than 4000Nm
Manufactured by: Kollmorgen
Sold and Serviced by Motion Technologies Pty Limited
Kollmorgen Linear Positioners
Kollmorgen Linear Positioners offer electric cylinder drive mechanisms designed around either lead screws or ballscrews. Ballscrews, being the more efficient of the two, utilise ballnuts riding on recirculating ball bearings resulting in higher speeds, loads and cycle rates. Electric Cylinders are preferred when: Positioning an externally guided and supported load, moving a load that pivots, there is a high concentration of airborne contaminants (rodless positioners are inherently less well protected), replacing a hydraulic or pneumatic cylinder with an electro-mechanical solution, brushless Servo with encoder or resolver feedback, stepper motors are also available, thrust up to 25000 N [5620 lb], and speed up to 1.3 m/s [52.5 in/s]
Manufactured by: Kollmorgen
Sold and Serviced by Motion Technologies Pty Limited
